ClearStream Iron-Rust-Odor Filter | Reynolds Water Co.

Customer Portal

800-572-9575

The ClearStream Iron-Rust-Odor filter has several mediums that oxidize the iron and odor so they can be filtered out as the water passes through the filter.

MAINTENANCE FREE AUTOMATIC IRON REMOVAL

  • Iron and rust removal
  • Odor removal, including sulfide odors caused by iron bacteria
  • Sediment removal, common in well water
  • Sparkling clean water
  • High flow rates
  • Irrigation Stain Control applications

Iron staining and the "sulfur/rotten egg" smell are two of the most common problems people complain about with well water. All of these problems can be eliminated with the ClearStream Iron-Rust-Odor Filter.

The performance of our filters is based on water quality and gallons per minute flow rate. Several sizes are available; contact us for our custom sizing model. The control system has extremely large internal waterways for high flow and very low-pressure loss. The ClearStream Iron-Rust-Odor Filter can also be used for outside irrigation stain control, using no chemicals!

Automatic Regeneration Technology

High technology, using only freshwater for automatic regeneration with no chemicals or clean up and no safety issues. Also, no chemicals or minerals are added to the filtered water.

The ClearStream Iron-Rust-Odor Filter has several mediums that oxidize the iron and odor so they can be filtered out as the water passes through the filter.

The filters are available in several configurations: single tank, twin, and multiple depending on the flow rate requirement. These systems include top-quality polyethylene insulating jackets to prevent tank sweating and the typical growth of mold because of excessive condensation moisture. The electronic timer on the control system is meter controlled and time accurate to determine regeneration frequency and time.

Reynolds Water

CONTACT US